home *** CD-ROM | disk | FTP | other *** search
/ Amiga Collections: Taifun / Taifun 027 (1987-08-15)(Ossowski, Stefan)(DE)(PD).zip / Taifun 027 (1987-08-15)(Ossowski, Stefan)(DE)(PD).adf / 28FONTS / NEWFONTS.DOC < prev    next >
Text File  |  1978-08-10  |  9KB  |  205 lines

  1.  
  2.  
  3.  
  4.        28 New Amiga Fonts.
  5.        -------------------
  6.  
  7.        This is the NEW 2.0 Version, dated 07/19/86. The previously
  8.        missing large fonts are now included (sorry for the delay),
  9.        and several bugs have been corrected. Also I have added an
  10.        automatic installation script for your convenience.
  11.  
  12.        This file is named NEWFONTS.DOC. It is file number 1 of 59.
  13.        It describes and documents, 15 large (14x16 Pixels) and 13 small
  14.        (7x8 Pixels) new fonts for the Amiga. These fonts are in the
  15.        standard format dictated by the ROM Kernal Manual. As such,
  16.        they are fully compatible with Deluxe Paint, Notepad and
  17.        any other program which makes use of the Amiga font capabilities.
  18.  
  19.        The fonts were converted to the Amiga from other microcomputers
  20.        that I have owned over the years. The original machines
  21.        did not support proportional spacing, kerning, etc. as the
  22.        Amiga does. Therefore ALL letters are the same width. What
  23.        this means is that a narrow letter such as 'I' will take up
  24.        just as many horizontal pixels as wide letters, such as
  25.        'M' or 'W'. In many cases this won't look too bad, but
  26.         certain letter combinations may look a little funny. (For
  27.         example, the word 'WIMP'.
  28.  
  29.         File number 2 (of 59) is named NEWFONTS.PIC. It is an IFF
  30.         (DPaint or Slide Show format) picture that illustrates
  31.         samples of all 28 new fonts. Look at this one first if
  32.         you want to get your mouth watering!!!
  33.  
  34.         File number 3 (of 59) is an installation script. This
  35.         will considerably ease the pain of getting the fonts onto a
  36.         disk in a useable form. However, if you are a glutton for
  37.         punishment I have described manual installation also.
  38.  
  39.         Files 4 thru 59 are the actual fonts themselves. Each font
  40.         requires two files. They are named as follows:
  41.  
  42.                      FONTxxA
  43.                      FONTxxB
  44.  
  45.         where xx is a numeric index between 01 and 28. In a table
  46.         below I have equated these index numbers with the font
  47.         names as shown in NEWFONTS.PIC.
  48.  
  49.         ----------------------------------------------------------
  50.  
  51.         MANUAL INSTALLATION
  52.         -------------------
  53.  
  54.         The 'A' file will need to be renamed to xxxxxxx.font
  55.         in the fonts directory on your workbench diskette.
  56.         Similarly, the 'B' file will have to be renamed to
  57.         xxxxxxx/8 (or xxxxxxx/16) also in the fonts directory.
  58.         In the latter case, xxxxxxx is the name of a directory
  59.         you have created in the fonts directory of your workbench
  60.         diskette. In both cases, xxxxxxx will be replaced by the
  61.         actual name of the respective font. For example,
  62.         outline.font & outline/8 (or outline/16). The numbers 8
  63.         and 16 become the actual file name for the font file, 8
  64.         being used for the small fonts and 16 being used for the
  65.         large ones. To further clarify what may not be clear by
  66.         now let me offer the following example:
  67.  
  68.             Using the first small font as an example, you must
  69.             first UN-ARC the two font files, FONT01A and
  70.             FONT01B. Then from CLI do the following commands.
  71.  
  72.                  MAKEDIR DF0:LARGE   ** Do only once   **
  73.                  MAKEDIR DF0:SMALL   ** Do only once   **
  74.                                      ** See Note Below **
  75.  
  76.  
  77.                  MAKEDIR DF0:SMALL/BYTE
  78.                  RENAME(or COPY) FONT01A to DF0:SMALL/BYTE.FONT
  79.                  RENAME(or COPY) FONT01B to DF0:SMALL/BYTE/8
  80.  
  81.         Following is a list of the index numbers that I have used
  82.         and the names of the fonts that go with them. Numbers 01
  83.         thru 13 are the small fonts and numbers 14 thru 28 are the
  84.         large fonts.
  85.  
  86.                      INDEX #            FONT NAME         SIZE
  87.                      -------            ---------         ----
  88.  
  89.                         01              BYTE                8
  90.                         02              COLOSSAL            8
  91.                         03              COUNT               8
  92.                         04              FLOW                8
  93.                         05              GOTHIC              8
  94.                         06              OUTLINE             8
  95.                         07              PINOCCHIO           8
  96.                         08              PUDGY               8
  97.                         09              ROMAN               8
  98.                         10              SHADOW              8
  99.                         11              SKINNY              8
  100.                         12              SLANT               8
  101.                         13              STOP                8
  102.                         14              APPLE               16
  103.                         15              ASTRA               16
  104.                         16              BOLDTYPE            16
  105.                         17              BROADWAY            16
  106.                         18              COUNTDOWN           16
  107.                         19              CYBER               16
  108.                         20              EXPANDED            16
  109.                         21              FRANKFURTER         16
  110.                         22              NINETY'S            16
  111.                         23              OUTLINE             16
  112.                         24              PINBALL             16
  113.                         25              ROMAN               16
  114.                         26              SCRIPT              16
  115.                         27              SLOPE               16
  116.                         28              TYPEWRITER          16
  117.  
  118.  
  119.  
  120.  
  121.         NOTE:
  122.  
  123.         I suggest that rather than keeping all 28 fonts in one
  124.         directory(usually named FONTS) that you put all of
  125.         the large ones in a directory called LARGE(or big)
  126.         and the small ones in a directory called SMALL(or little).
  127.         The reason for this is that not all programs will handle
  128.         a pull-down menu item with 28 entries in it. I haven't
  129.         tried Deluxe Paint, but that many entries causes Notepad
  130.         to freak-out. Anyhow, if you do split them you will have
  131.         to assign fonts to the proper directory before starting-up
  132.         DPaint or whatever program will be using the fonts. You
  133.         can do this from CLI with the following command:
  134.  
  135.              1.   ASSIGN FONTS: DF0:LARGE     or...
  136.              2.   ASSIGN FONTS: DF0:SMALL
  137.  
  138.         -----------------------------------------------------------
  139.  
  140.  
  141.         AUTOMATIC INSTALLATION
  142.         ----------------------
  143.  
  144.         1. Create a NEW Work Bench disk by making a copy of your
  145.            ORIGINAL Amiga Work Bench disk.
  146.  
  147.         2. Copy all of the files that begin with the letters 'FONT'
  148.            onto the new WB disk that you created in step 1. Do NOT
  149.            put them into any directory or sub-directory.
  150.  
  151.         3. Also copy the installation script onto the same WB disk.
  152.  
  153.         4. Boot your Amiga from the disk just created and get into
  154.            the CLI. Be sure your directory is set to df0:
  155.  
  156.         5. execute InstallFonts
  157.  
  158.         6. Sit back and relax for a couple of minutes. When the
  159.            installation script completes, there will be two
  160.            additional font directories called 'large' and 'small'
  161.            on your new WB disk. To use any of the new fonts from
  162.            Dpaint, Note Pad, etc., simply assign the fonts device
  163.            to the correct directory BEFORE starting the program.
  164.  
  165.                   E.G.   ASSIGN FONTS: DF0:large  or.....
  166.                          ASSIGN FONTS: DF0:small
  167.  
  168.            You can return to the default (albeit somewhat less
  169.            exciting fonts) at any time by re-assigning as follows:
  170.  
  171.                          ASSIGN FONTS: DF0:fonts
  172.  
  173.  
  174.         -------------------------------------------------------------
  175.  
  176.  
  177.         Even though I did not convert these fonts with proportional
  178.         spacing, kerning, etc., these features could still be added
  179.         by an enterprising individual who was willing to spend the
  180.         time. To do this though, he would need the assembler sources,
  181.         an assembler and a knowledge of how Amiga fonts are built.
  182.         The last two items are available from your local Amiga
  183.         dealer and the ROM Kernal Manual, respectively. The first
  184.         may be obtained by leaving a message to me on my home board.
  185.  
  186.  
  187.                                     Bill Fischer
  188.                                     Casa mi Amiga  BBS
  189.                                     Jacksonville, FL
  190.                                     (904) 733-4515     (300 or 1200 baud)
  191.                          
  192.  
  193.         Several of the large fonts do not have lower case. In those
  194.         cases the upper case letters are repeated for lower case keys.
  195.         With one large font (script), the opposite is true; there are
  196.         no capital letters, only lower case. And finally, there may
  197.         occasionally be a couple of characters missing in about six
  198.         of the large fonts. In most cases this will be the @ character
  199.         and/or all the characters above hexadecimal 7A (lower case 'z').
  200.         When one of these missing characters is typed from the keyboard,
  201.         it will be replaced on the screen by a SPACE.
  202.  
  203.  
  204.  
  205.